Vertical Display

still image, movie, slow&quick motion

Sets whether or not to automatically rotate the information display when you hold the camera vertically.

This function can be used when the camera’s system software (firmware) is Ver.2.00 or later.

  1. MENU → (Setup) → [Monitor] → [Vertical Display] → desired setting.

Menu item details

On:
Rotates the information display according to the camera orientation.
Off:
Does not rotate the information display regardless of the camera orientation.


About the vertical information display

During vertical display, the same information is provided as on the horizontal shooting screen, and it is arranged to match the orientation of the monitor.


About the controls during vertical display

During vertical display, the direction of the top/bottom/left/right side of the control wheel and the touch operations are also rotated to match the orientation of the monitor so that intuitive operation is possible.

The functions assigned to the top/bottom/left/right side of the control wheel using [Custom Key Setting] or [Custom Key Setting] will not rotate during vertical display.

Hint

  • You can set the information to be displayed on the screen by selecting MENU → (Setup) → [Operation Customize] → [DISP (Screen Disp) Set], and the display mode can be switched by pressing the DISP (Display Setting) button.
  • During vertical display in the movie recording modes, information other than the movie recording status and recording time will be hidden after a certain period of time if the screen display mode is set to [No Disp. Info.] and [Exposure: TimeOut] is selected.
  • During vertical display, the touch function icons displayed on the left and right sides of the screen will also be arranged to match the screen orientation.

Note

  • The orientation of the camera cannot be detected when the lens is facing up or down.
  • While recording movies, the information display will not rotate even if the camera's orientation changes.
  • While recording movies with vertical display, [TC/UB Disp. Setting] cannot be changed from [Counter] to [TC] or [U-Bit].
  • When [TC/UB Disp. Setting] is set to [TC] or [U-Bit] in the movie mode, [Vertical Display] switches to [Off].
Go to Page Top
TP1001834356